11+ PSCAD Jobs in India
Apply to 11+ PSCAD Jobs on CutShort.io. Find your next job, effortlessly. Browse PSCAD Jobs and apply today!
• Developing spreadsheets for power system calculations.
• Writing a study report with result analysis and conclusion with relevant information in proper format.
• Performing basic studies (i.e., load flow, short-circuit).
• Developing network model in ETAP, PSS/E.
Requirements:
• Good English skills – written and spoken.
• IT knowledge (MS Office, MS Excel)
• Willingness to adapt to job requirements
• Good organization and time management skills
• Willingness to work (and learn) in distinct aspects of engineering and renewable sector.
• Problem-solving skills and ability to produce out-of-box solutions.
• Self-initiated and passionate to take up technical challenges and explore new areas.
• Well versed and passionate to learn and study about the renewable energy sector.
Technical Skills:
• Knowledge of Power System analysis, power system dynamics.
• Apply technical and analytical skills to study outcome.
• Having knowledge of ETAP, PSS/E, Powerfactory DigSilent or PSCAD.
Hiring for the below position with a leading Pharma Engineering MNC.
Description:
Exp:2-7 years
Location: Bangalore
Good working experience in 800XA DCS
- Good working knowledge of 800xA system (Hardware/Software), PCDL, PCEL and other system libraries.
- Good understanding of ISA S88 Batch concepts.
- Should have developed Process Automation Conceptual System Architecture.
- Should have developed PCS user requirements and system hardware specifications.
- Should have developed functional specifications (Control Module, EM and Phase class) for recipes.
- Executed Module integration Tests, FAT, SAT, IQ and OQ
ExpressPosition: Senior Hardware Engineer
Requirement: Immediate joining
Job Description for the above position:
➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must
Requirement.
➢ Experience in a range of technologies including digital, analog and power electronics.
➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.
➢ Excellent knowledge of electronic circuits and analysis.
➢ Familiarity and Experience with Altium Designer and Allegro tools.
➢ The ability to work with software engineers to design and debug systems.
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.
➢ Good knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.
➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE
video standards a plus.
➢ Hands-on experience in design/troubleshooting/updating hardware.
➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.
➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.
➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...
➢ Strong knowledge on layer stack-up build.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person
Specification/Competencies:
➢ Self-motivated
➢ The ability to work independently, within or lead the team.
➢ Well organized
➢ Strategic thinker.
➢ Proactive
➢ Ability to manage multiple tasks and work toward long-term goals.
➢ Excellent communication skills (verbal and written)
➢ Solid understanding of engineering fundamentals and technical problem-solving skills.
➢ Experience in establishing and sustaining strong relationships with the extended team.
.NET
CPlease go through with the below mentioned job description
Position title: Firmware Engineer
Experience: 6-12 years
Notice Period: 0-30 days
Location: Bangalore(Sarjapur)
Role type: Permanent
About the role
Experience in Firmware/Software programming in embedded Linux & RTOS based application development. Candidate must have a very good understanding of ARM processor, hardware and custom board or product development experience.
Roles and Responsibilities:
Design, code and integrate software for an embedded Linux/RTOS targeted application(applications, drivers, framework)
Customization, deployment and maintenance of Linux distribution
Interact with Linux kernel, integrate new device drivers Improvement and maintain existing software components
Perform unit test, Integration test, verification and validation of the product developed.
Assist with the hardware design surrounding the processor
Document the projects according to standards (protocols, architecture, technical specifications, etc.)
Specific skills:
Expert in C programming with RTOS.
Hands-On experience with Protocol development.
Nice to have Protocol development experience such as USB or DP, HDMI or equivalent.
System level design and understanding of overall system
Strong knowledge of Linux, ARM processor architecture with SOC, FPGA interface is a plus.
Hand-on experience on Linux kernel and device-driver development and debugging.
Knowledge/Experience of TCP/IP, Network programming.
Ability to write effective and reusable code according to best practices.
Must be a dynamic, autonomous, and team-oriented individual.
Knowledge of hardware and low-level development is an asset
Please provide below mention details:
No. of years of working experience in Embedded Linux -
Protocol stack development Exp, any specific protocol worked on -
Relevant Experience:
Official Notice Period 30/60/90 Days:
Date of Resignation:
Serving Notice Period and Last Working Day:
Current Company:
Current Location:
Work Location:
Current CTC(fixed,variable):
Expected CTC(fixed,variable):
Interview Availability:
Any Offer:
Relocate to Bangalore(Sarjapur):
company name
company location
date of joining
Pace Robotics is a construction robotics startup incubated by SINE IIT-Bombay and backed by Pidilite Ventures, MARL 5G Accelerator and Kochi Holdings. We are making the construction process faster, smarter and efficient through robots that can do advanced construction tasks and digitize execution data in real time. We are currently piloting our first product, a modular robot for plastering, painting and putty of building interiors, at construction sites.
To support our next stage of growth and to take the product from prototype to manufacturing ready design, we are looking for an embedded software engineer who will support the design and implementation of the software for embedded devices and systems end to end from requirements gathering to commercial deployment.
What will you do
- Develop embedded code which enables simultaneous exchange of data between various modules and sensors to facilitate fast/robust decision making for the robot.
- Selection of Communication Protocols, actuation sequencing and deep involvement with embedded software and control strategy.
- Develop and maintain various engineering tools used to debug, analyze, and test embedded products.
- Support the Embedded Systems Lead in working as the common link between the hardware, robot autonomy, and software teams, converting inputs from each team along with overall product/customer needs into electronic circuits, software and hardware.
- Assist in conceptualizing, designing, fabricating, integrating and testing overall embedded architecture, embedded boards, software and circuitry for Pace Robotics’ fleet of AGV based robots.
- Assist in selection and integration of all active, passive components, micro-controller, processor w/peripherals and power components.
- Work on improving the efficiency of the power distribution and consumption.
- Work on designing the wiring scheme of the whole autonomous system.
Qualifications
- Masters or Bachelors (with 2-5 yrs exp) in Electronics & Communication / Electronics & Instrumentation/Electrical & Electronics/Embedded Systems with relevant experience in industrial R&D Projects.
You have the following technical skill sets:
- Expertise with microcontroller/microprocessors (non - Arduino), C programming, digital electronics, different communication protocols such as SPI, I2C, rs232, ethernet, rs485, CAN etc
- Good Understanding of Electronics Circuits and Schematics.
- Deep expertise of RTOS / LINUX programming concepts.
- Excellent understanding of Signal Processing methods, (Good To have)
- Experienced in PCB and wiring harness Design, (Good to Have)
- Proficient with Matlab, Simulink, DAQ software. (Good To have)
You have the following personal attributes:
- You are highly organized and methodical in everything you do
- You love solving problems and look at them as an opportunity to grow
- You get excited about thinking, talking and building technology and exploring its endless possibilities
What's in it for you:
Globally, Construction provides a 1.6 Trillion Dollar opportunity, just by making the work more efficient. This is the market we are after. You will be an integral part of the core team of an early stage startup on a mission change the way we build our world and disrupt one of the oldest and the largest industries. You will be designing products that can change the landscape of construction, become ubiquitous in project sites and be synonymous with construction of the future (Think of JCB and Tower Cranes of today)
We promise you an environment that promotes unhindered innovation and one that can provide exciting opportunities for accelerated growth. You will be working with a stellar engineering team having diverse experience in developing robots for automotive, agriculture and construction industries. You will have immense learning opportunity as you will be working on ‘never-seen-before’ products for an industry that’s ripe for technological disruptions.
The compensation includes company stocks through ESOP’s and Other Perks like Health insurance and Personal Accident Insurance for Self.
Please note that we don’t necessarily expect to find a candidate that has done everything listed or possesses all the required skill sets but you should be able to make a credible case that you have done most of it and are keen on learning new things on the job.
Relevant Experience: 2-5 years
The position is responsible to carry out product design, tests and other related activities as allocated. Working as a member within the current hardware engineering team, who collectively execute all the necessary activities to design, improve and optimize customer projects and production - especially the reliability and robustness aspects.
Requirements:
- Graduate in Electronic Engineering or equivalent Minimum 3-5 years working experience in a similar industry Self-driven individual with hands-on skills.
- Experience of Embedded Electronic Digital, Analog, Power electronic design.
- Familiarity with ECAD tools for schematic capture, simulation, component selection, PCB design.
- Experience of design for EMI/EMC.
- Create manufacturing deliverables for prototypes and production.
- Application of Design for Manufacturability (DFM) and Design for Testability (DFT) techniques.
- Experience of debugging and fault finding in new and existing designs.
- Experience of failure analysis and design review.
- Experience with tools like Cadence or ORCad.
- Creation of RFQ package for EMS provider and qualification of offers.
- Experience of project/task planning.
- Knowledge of project management tools.
- Well versed with usage of test equipment like Multimeter, Oscilloscope and maintenance of laboratory equipment.
- Familiarity with EMI, EMC, Environmental, Mechanical standards and type tests.
C++- Works towards developing Stable & Efficient Firmwares for Embedded
- Responsible for developing Firmware which are Stable, Efficient and scalable.
- Responsible to create coherent and scalable architecture designs.
- Responsible for understanding and utilizing best BLE / IOT
- Responsible for understanding various RTOS design principles.
- Qualification: B.E. / B.Tech / M.C.A. in Computer Sciences.
- Must Proficient in Embedded C, C++, BLE, Zephyr RTOS, nRF.
- Ready to work from home.
- Should have above 4 years of experience.
- Looking for engineers with one of the below requirements:
- 3+ years of embedded development experience in a Linux environment
EDK2 experience
SCT experience
knowledge of TPMs
oWith Option2:
worked on bootloaders or uboot
- Total Experience:
- Rel Experience in Embedded development:
- Rel Experience in Linux:
- Rel Experience in C:
- CCTC:
- ECTC:
- NP:
- Company:
- Current Location:
- Reason for Job change:
- Offer:
- Open for a contract position?:
Python
MongoDB
Follow Cutshort